2.2 Description of Camera Parts
AC24V
Lens Mount
①
This mount is used to install a CS-mount lens. CS-adaptor ring is required when using a C
mount lens.
② Camera Mounting Screw Holes
Screw holes for mounting the camera.
③ Mount Adaptor
The adaptor can be attached onto the top or the bottom of the unit.
④ Auto Iris Lens Connector (4-pin type)
The lens connector supplies the auto-iris lens (not supplied) with DC control signal.
PIN NO. VIDEO DC
1 DC + 12V CONTROL -
2 NC CONTROL +
3 IRIS DRIVE +
4 GND DRIVE -
⑤ S-Video Output Terminal
Separate Y(brightness) and C(Color) signal are outputs from this terminal to obtain better
video quality at a video monitor.
1. C signal: 0.3V (p-p), 75Ω, unbalance
2. Y signal: 1.0V (p-p), 75Ω, unbalance, negative synchronizing
3. C signal Ground
4. Y signal Ground
⑥ Iris Mode Selection Switch
Select DC or VIDEO mode according to the lens.
⑦ OSD Control Buttons
ENTER button
UP & DOWN buttons
LEFT & RIGHT buttons
⑧ Video Connector
Video can be outputted via this connector. (75Ω).
Comments to this Manuals